Precautions for post-maintenance and maintenance of the hot melt glue machine, and maintenance of the equipment on time can reduce the damage caused by the hot melt glue machine during use.
The wear and tear of the hot melt glue machine at work mainly includes the power supply of the hot melt glue machine, the load (pressure) of voltage and current, the speed of the relative movement, the movement properties of the friction area, the production environment and the cleanliness of the hot melt glue machine, etc.
Too large or too small power supply and voltage will make the electrical appliances of the hot melt glue machine burn out or fail to work, and the change of the moving speed of the parts will also affect the wear of the parts. Different production environments, such as dust, dirt, ore powder, metal powder and other impurities, if they fall into the hot melt glue machine, it will not only accelerate the wear of the hot melt glue machine, but also make the bonding process difficult.
The only way to prolong the life of the hot melt adhesive machine is to use it correctly and maintain it properly. Don’t underestimate these two points. It is not so simple to use it correctly and maintain it properly. The life of the melter is reduced.
When using the hot melt glue machine, you should pay attention to ensure that the use environment is at a suitable temperature and the surrounding environment does not have many volatile and corrosive objects.
It can only be operated safely in a suitable environment. In addition, we must not add too much glue when adding glue. If it is too full, it will overflow, which will be difficult to clean and cause the heating rod to short-circuit and catch fire.
In the process of maintenance, we should not ignore the cleaning of its filter screen. Maintaining a cycle of cleaning will also prolong its service life. During the cleaning process, we must stop the motor and always pay attention to safety. The problem, if the hot melt glue machine is heated for a long time or not used for a long time, it should be regularly maintained.
What should I pay attention to when maintaining the hot melt glue machine?
- Before the maintenance of the hot melt glue machine, the power supply of the hot melt glue machine must be completely cut off to prevent electric shock accidents;
- When cleaning the hot melt glue tank, do not use flame or sharp tools to avoid scratching the inner surface coating of the glue tank;
- Safety gloves, goggles and long-sleeved clothes should be worn when repairing the heating part to avoid burns;
- Only qualified personnel can maintain the hot melt adhesive machine;
- If there is air leakage or glue leakage, the hot melt glue machine must not be used continuously;
- When loosening or installing the pressure joint, it must be ensured that the operating pressure of the hot melt gluemachinehas dropped to zero;
Basically, if the usual maintenance can do the above points, the service life of the hot melt adhesive machine can be increased by at least 20%.
Now It’s Your Turn
I hoped you enjoyed my detailed information on this article.
Now I want to hear from you:
Which parts of this post are you most excited to know?
Are you going to know more about other kinds of related products? Or do you want to do deep research on it?
Let me know by leaving a quick comment.